Aml M2500 Decoder Instrukcja Użytkownika Pobierz pdf (Strona 22)

Settings:

The following settings, which are the defaults, apply to this mode of

operation:

Laser/CCD Timeout 1-9 sec

Laser/CCD Trigger Shutoff ON

Laser/CCD Continuous Run OFF

CONTINUOUS SCANNING - REFLECTIVE SURFACE REQUIRED

Recommended Usage:

Recommended for most applications; a highly efficient mode. Note

that it is NOT recommended if the laser is constantly exposed to a

reflective surface, such as a white counter top.

Operation Description:

The laser will power ON when it is brought within 5 inches of a reflective

surface, and will continuously scan and read one bar code after

another, until pointed away from any reflective surface. When pointed

away from a reflective surface, the laser will continue to scan for the

number of seconds specified in the LASER/CCD TIMEOUT option (the

default is 1 second) before it shuts off.

RE-READS: Accepts a re-read after the amount of time specified

in the CONTINUOUS RUN READ DELAY option (the

default is 1 second) has passed.

Settings:

The following settings apply to this mode of operation:

Laser/CCD Timeout 1-9 sec

Laser/CCD Trigger Shutoff ON

Laser/CCD Continuous Run ON

Continuous Run Read Delay 0.1-9.9 sec

For optimum "hands-free" performance, set the LASER/CCD

TIMEOUT option at 3-4 seconds.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 80 81

Brak uwag

Aml M2500 Decoder Instrukcja Użytkownika Strona 22