Aml M2500 Decoder Instrukcja Użytkownika Pobierz pdf (Strona 41)

4) SEND DAISY CHAIN ID (ON/OFF)

ON Sends the daisy chain ID at the beginning of data

transmit, when in the daisy chain mode.

OFF* Does not send daisy chain ID.

5) HOST RESPONSE (ON/OFF)

ON Unit requires receipt of a Host Response after

each data transmit. When used during daisy chain

mode, the command must be preceeded by the

daisy chain ID.

OFF* Unit does not require a Host Response.

Valid Host Responses are:

CTRL G (ASCII 7) - Single Beep.

CTRL R (ASCII 18) - High/Low warble tone.

CR (ASCII 13) - Data OK. No action

needed.

6) HOST RESPONSE TIMEOUT (00-99 SEC)

This parameter specifies how long the M2500 will wait for the

host response. If the response timeout is set to zero then the

M2500 will wait indefinitely. If a response is not received

within the timeout period, the M2500 will continue scanning.

The host response delay is programmable from 0-99 seconds.

7) HOST BEEP ENABLE (ON/OFF)

ON Enables receipt of commands from the Host

Computer. These commands can be sent at any

time.

CTRL G (ASCII 7) - Single Beep.

CTRL R (ASCII 18) - High/Low warble tone.

OFF* Disables Host Commands.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 80 81

Brak uwag

Aml M2500 Decoder Instrukcja Użytkownika Strona 41