AML M3000 Podręcznik Użytkownika Pobierz pdf (Strona 41)

M3000 Portable Bar Code Reader User's Guide

4-14

NOTES: 1. If a read does not occur immediately, try moving the laser closer to the bar code

label and adjusting the pointing angle. If the reader has not read the label within

the time period specified in the Laser/CCD Setup TIMEOUT option (the default

is 1 second), it will turn off the light beam.

2. For triggerless operation, refer to "Laser/CCD Setup ALWAYS RUN and

Laser/CCD Setup TRIGGER OFF" options.

3. After a successful read the following occurs:

• The decoder BEEPS.

• The red light on the back of the laser turns off.

CCD Scanning

1. Place the CCD scanner on the label or close to it (within one inch). Make sure the bar

code label fits completely within the frame of the CCD opening.

2. PRESS the button on the CCD scanner.

NOTES: 1. If a read does not occur immediately, try moving the CCD closer to the bar code

label and adjusting the pointing angle. If the reader has not read the label within

the time period specified in the Laser/CCD Setup TIMEOUT option (the default

is 1 second), it will turn off the light beam.

2. For triggerless operation, refer to "Laser/CCD Setup ALWAYS RUN and

Laser/CCD Setup TRIGGER OFF" options.

3. After a successful read the following occurs the reader BEEPS.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 155 156

Brak uwag

AML M3000 Podręcznik Użytkownika Strona 41